Protonverse Labs
BoardStudioProgressPressPostsDocs ↗GitHub ↗Crowd Supply ↗

Progress

From early failures to a working board.

Three prototypes, countless hours of troubleshooting and many design revisions turned an idea into working, open-source hardware. This is how it happened, and what comes next.

3
prototypes
1
open-source board
5
senses working together
  1. A board that would not show a single frame.

    Our goal was to put a camera, microphone, motion sensors, storage and wireless on one compact board. The first prototype taught us how hard that is: after weeks of debugging and software changes we could not capture a single camera frame. We assumed it was software. The root cause turned out to be hardware compatibility, and alongside it we found design problems in microSD placement, antenna clearance, component positioning and PCB routing.

  2. Shared with the community.

    We shared the early PCB design on Reddit. The technical feedback from the open-source community helped us find weaknesses and rethink several important hardware decisions. We also decided to take direct control of the development ourselves: revisiting the design, investigating each failure and working through the problems step by step.

  3. An important step forward.

    The second prototype fixed some of the first issues, and testing revealed new ones. We kept modifying the hardware, reviewing component compatibility and improving the PCB layout. Each attempt taught us more about the system.

  4. Everything working, at the same time.

    With the third prototype we reached what we had been working toward: a 5 MP camera, I²S microphone, IMU, microSD storage and Qwiic expansion port on a compact 39 × 50 mm PCB, with all major components functioning simultaneously. Along the way we learned hard lessons about manufacturing and quality control, from reversed LED polarity to camera modules that were not what we ordered.

  5. Accepted by Crowd Supply.

    Proton AI Core Vision+ was accepted by Crowd Supply, where the board will be sold.

  6. Manufacturing partnership with Elecrow.

    Through Project Aviary we established a manufacturing partnership with Elecrow. The board has also been recognised by technology publications, including Hackster.io.

  7. Finalising for production, building Studio.

    We are finishing the improvements needed for production and preparing the Crowd Supply campaign, while continuing to develop Protonverse Studio, our browser-based development environment.

What we learned

We did not outsource it and wait.

We were directly involved in identifying problems, testing solutions, redesigning the hardware and making the technical decisions that shaped the final prototype. Developing a product is not about making the first design work. It is about understanding why things fail, learning from every setback and improving until the idea becomes reality.

Launching on Crowd Supply

Put eyes, ears and balance in your next project.

Subscribe on Crowd Supply and be first in line when the campaign opens.

The board held in one hand